DPXA - Single Shell DPX
DPXA connectors are one-piece shell miniature rack/panel connectors. The construction offers high strength and maximum utilization of insert area for contact arrangements accommodating up to 106 contacts. Shells are keystone-shaped for polar­ization. Operating temperature for the DPXA is -54.2°C to +125°C (-67°F to +257°F).

DPXB - Polarized ARINC Shell

DPX2 - Two Gang DPX Series are the original two-gang versions of the DPX, and are made of the same materials and accommodate the same arrangements.

DPX2 - A - ARINC A Shell

DPX2-A connectors are DPX2 connectors with an ARINC A shell. This shell type has the receptacle flange placed .344 (8.74) from the front of the engaging portion of the shell, and short aluminum alloy polarizing posts permit polarization before contacts engage.

DPX2-B -ARINC B Shell

DPX2-B connectors supersede the DPX2-A and have an ARINC B Shell. This Shell type has the receptacle flange placed .060 (1.52) from the front of the engaging portion of the shell, and polarizing posts permit polarization before the shells engage.

DPX3 - Three Gang DPX Series
DPX3 connectors are three-gang versions of the DPX, made of the same materials, and accommo­date the same contact arrangements. The three- gang version can therefore accommodate up to a total of 318 in the keystone shaped shells, with three polarizing posts that are capable of providing up to 99 polarizing positions.

DPX4 - Four Gang DPX Series
DPX4 connectors are four gang versions of the DPX, made of the same materials, and can accommodate four separate arrangements that can total up to 424 contacts. The DPX4 has three polarizing posts with 99 polarizing positions.

BKAD/E
Rear Release/Rear Removable Size 12, 16, 20, 22 Crimp Contacts
BKAD/E connectors represent the standard for new avionic systems developed to support the air transportation market. Several important design concerns have been addressed and solved in this new series. High mating forces of pluggable modules in a rack have been reduced by approximately two-thirds. The low insertion force contacts are also inter­changeable with the contacts used in the DPX series and permit retrofit of existing equipment.

BKAF
Front Release/Front Removable Size 22 Solder Tail and Wrap Post Contacts
This new connector is totally intermateable and intermountable with ARINC 600 connectors now in the field. The BKAF permits the user to easily replace a contact in case of problems, rather than disas­semble the entire connector--it is available with size 22 contacts in wrap post or solder-tail ver­sions. The system maintains the advantages of low insertion force technology incorporated in all ARINC 600 connectors.

DPA-Miniature Rack/Panel

DPAF - Float Mount Shells

DPAMA -Rear Insertion Contact Assembly
DPAMA plugs are DPA plugs with rear insertion type contact assembly for rear insertion, re­lease and extraction of crimp type contacts. In­sertion requires no tool; extraction requires an expendable plastic tool. Hard dielectric, closed- entry socket insert has lead-in chamfers for positive mating of pin contacts. Contacts are of simpler, stronger design for greater resistance to bending or damge and are crimplable with the M22520/1-01 tool.

DPD/DPDMA
Cannon’s DPD rack and panel connectors are
distinguished from other connector lines by their
rectangular shape which provides maximum space
utilization on rack or chassis mounted equipment.
They are available in non-environmental single and
two-gang configurations.